150mm3 Abrasion EP200 conveyor belt manufacturer
Thie one EP conveyor belt is produced with 15MPA, 150mm or less abrasion with higher wear resistance, oil resistance.
The length per roll is 200m and width is 600mm, 800,, etc.
150mm3 Abrasion EP conveyor belt manufacturer
Now the rubber raw material goes up so fast, resulted in conveyor belt also goes up. And China goverment pay attention to environment protection strictly, resulted in the delivery time is longer than previous. So many clients start to stock conveyor belt to make the delivery time and save the cost.
If there is any demands on conveyor belt, welcome to your inquiry in any time.
Fabric conveyor belt is a kind of traditional rubber belt, which is constructed by fabrics and covered with top and bottom rubber. It is reliable to transportation for short and medium distance, it is flexible, heavy duty and high speed. Now fabric belt is preferred to using by mining, seaport, construction, metallurgy, chemical and grain transportation.
HYRUBBERS CO.,LTD is specializing In manufacturing, exporting and developing conveyor belt, in the same time rubber sheet, rubber tiles and so on.
The factory founded has 260 people including 220 workers, and 15 engineers and technicians, 25international sales workers, covering an area of 50000 m2, owing 220 sets of main production equipment.
The ISO9001: 2000 certified factory has established a stable and reliable quality control system with a modem management.
Accordance with different carcass used in fabric belt, we can supply CC belt,Nylon belt, EP belt.
CC Conveyor belt available for the materials handling of medium distance.
NN conveyor belt has the advantage of flexible, high tension, impact resistant characteristics, available for the conveying materials of medium distance.
EP conveyor belt has the advantage of low elongation, excellent heat resistant, impact resistant, available for the materials handing of heavy duty, high speed and medium distance.
Accordance with different applications, we can produce different grades of belt as following:
1) Heat Resistant Belt
According to the temperature of working environments, we can manufacture 3 different grades heating resistant belt, including up to 120℃ grade (HR120), up to 150℃ grade (HR150), up to 180℃ grade (HR180) and up to 200℃ grade (HR200) .Generally used by cements and steel works.
2) Abrasion Resistant (≤90mm3) / super abrasion resistant (≤60mm3) Belt
Generally used for transport the hard or shaped materials, like iron ore, diamond, copper and other minerals.
3) Oil Resistant Belt
Generally used for wood, papermaking, oil-based grain transportation.
4) Acid/Alkali Resistant Belt
Always used in Chemical materials transportation.
5) Cold Resistant Belt
The belt can work in some cold environment, like Northeast of China, Russia and North European countries.
6) Fire Resistant Belt
Always used in underground coal mining, steel works and so on.
7) conventional Belt
Generally used for small powder, grain and block materials.